Home News About Us Products Applications Service Contact
Chinese English Russian
   

 


Soil Reinforcement
Concrete Reinforcement
Erosion Control
 
 


     
TMPGrid In Soil Stabilization
     
TMPGrid In Retaining Wall
 
How to use Engineering Fiber
 
 
 
Twisted Bundle PP Fiber
 
 
 

This fiber is used to instead of steel fibre for reinforcement to cement concrete.Compared with steel fibre, it has the advantage of easy dispersing and blending, no damage to the mixing equipments, etc.

The Twisted Bundle PP Fiber is used polypropylene as its raw material, produced the rough surface treatment by special parallel thread extruding & twisting process. It has high break strength, better dispersion and strong combining ability, will be widely used to instead of steel fibre to reinforce the cement concreat and crack- resistant.

 
   
 Main Technical Specification  
 

Density(g/cm 3 )

0.91

Elastic Modulus (MPa)

>5000

Length(mm)

54

Equivalent Dia(mm)

0.3±0.05

Shape

bundle-like and twisted

Break tensile Ratio(%)

>15

Break Strength(MPa)

560

Resistance to acid,alkali

strong

 

   
 Applying Instruction

 

 
  1. Ration design of the fibre concrete
    Generally the recommended amount to add to the concrete is more than 2.7kg per sqm (volume ratio is 0.3%), reinforce- ment adding amount is 5.5kg, Compared with adding 47kg of steel fibre, 5.4kg polymer fibre has the same volume ratio to the concrete.
  2. Length
    50mm for common crack-resistant requirement.
  3. Matching Ratio
    Usually it is no need to Change the matching ratio of the concrete.
    Considering the requirement of fissure-resistant, the polymer fiber is recommend to combine with the polypropylene fiber- mesh with the volume ratio of 1:1 (0.9kg fiber-mesh to per sqm of cement concrete).
  4. Mixer Adoption
    Double-axle horizontal compelling mixer is priority.
  5. Mixing process
    Crushed stones, fibers and sands are put into the mixer in succession.After stirring for two minutes, fiber will fully spread and then add cement and water and stir normally. The addition of materials also can be put into as common concrete, but the stirring time should be properly prolonged to make fiber com- pletely mixed.
  6. Shaping & Maintenance
    There is no special requirement, may along the vibrating time for 30s, The maintenance of the fibre concrete should be done same as the normal concrete.
  7. Package
    1kg or 0.5kg per bag in common ; May packed as customers' requirement.
 
   
 Economy  
 Compared with steel fiber, Polymer fibre has the advantages of corrosion and wear-resistant reducing 50% cost with same volume to steel fibre.  
   
    
  
 
 
Copyright 2010
Taian Modern Plastic Co., Ltd
All Rights Reserved
  Tel: +86-538-8560690 Fax: +86-538-8569959 E-mail: info@tamodern.com